A pair of Knot Forceps is a necessary tool for suturing. This type of forceps has two strands of thread that are threaded together. The twisted portion of the loop 58 is passed through the openings in the jaws and is then wrapped around the forceps. The long end of the line is clamped between the closure surfaces 22, 32, and the tip 44. The forceps are then opened and the knotted end is pushed into the hole.
A pair of Knot Forceps consists of a stand-up part 52 and a free end 54. The standing part is the free end, and the eyelet of the hook or fly is inserted into the loop 58. The operator holds the loop in place and then passes the line over the tip 44. The closed jaws are then opened, and the knotted line is positioned to fit over the eye of the hook.
The forceps are held with the tag end and slipped over the hook's eye. Pull the two loops over the eye of the hook. The knot should be snug and several inches above the eye of the hook. If you're not confident with this technique, consult a medical professional. It's worth it to take the time to learn how to use the knot forceps and make the procedure easier. You'll be glad you did. You'll be pleased with the results.
In the Twisting Method, the forceps are held around the tippet and pulled out of the first loop. Using the forceps, the tag end is pushed through the second loop. Continue pulling until the end loops of the knot cannot slip over the hook eye. The knot should be tight and a few inches above the eye of the hook. Once you've tied the knot, you can slide the other loop back in to the vessel.
The forceps are connected by a pivot pin. The member 12 is a long, thin, slender jaw that has a smooth, gently tapered outer surface. The handle 24 terminates in a finger loop. The member 14 is asymmetric and has a roughened closure surface. Its hinges are held together by a pivot pin. The two-piece forceps are connected by a single pin.
The knot forceps are comprised of a standing part 52 and a free end 54. The free end is inserted over the eyelet of the hook or fly. The operator then holds the loop 58 in a loop. The loop then passes over the closed forceps tip 44 and ends in the annular groove 36. Once the knot is tied, the forceps are able to stab the fly in the eye.
A set of Knot Forceps is necessary to tie a knot. The forceps is designed to tie the knot in a 'V' shape. The two-part structure is made up of two parts. The tip of the forceps extends from the body of the forceps. The two-piece structure is attached to the other piece of the tippet by a ring. A double-piece forceps is designed with the tag end at the base.
